Incubators

Eppendorf ThermoMixer™ C

Improve your assay results by dry incubation and mixing of your samples simultaneously with this mixer. The Eppendorf ThermoMixer™ C is ideal for heating, cooling and mixing almost any of your lab vessels. ThermoMixer C w/o thermoblock, EU plug, 220-240VTHERMOMIXER C W/O THERMOBLOCK,

Thermo Scientific™ Digital Heating Shaking Drybath

Increase lab versatility with the Thermo Scientific™ Digital Heating Shaking Drybath, which can be used as a drybath, shaker or both. SHAKE/HEAT DRYBTH120V/US PLG

Memmert™ Forced Convection Incubator with Single Display and Touchscreen

Use these laboratory incubators for applications requiring temperatures up to +80°C, including critical incubations at +37°C. Memmert™ Forced Convection Incubators with Single Display and Touchscreen eliminate key temperature overshoots and warm valuable loads carefully. INCUBATOR IF75 SINGLEDISPLAY 74L 30-80°C

Slide Moat™ Incubators

For in situ hybridization from 5°C above ambient to 100°C Slide Moat hybridization oven for 3x10 slides max. 100°C, 230V

Fisherbrand™ Isotemp™ Digital Dry Baths/Block Heaters

Increase lab versatility Fisherbrand Single block dry bath: digital control, 4LED, Easy timer, 200-240V

Thermo Scientific™ Accessories for Thermo Scientific™ Digital Heating Shaking Drybath

Optimize flexibility and performance SHAKE/HEAT BLOCK 1.5 ML

Aqualytic™ TC 445 S Model Incubator

Used for temperature-controlled storage of samples or BOD determination in effluent analysis work. Aqualytic™ TC 445 S Model Incubator features an insulated housing and efficient components to provide maximum energy efficiency. INCUBATOR THERMOSTATIC CONTROL +2/+40°C 445L

Binder™ Avantgarde.Line Model ED 56 Drying and Heating Chambers with Natural Convection

ED series drying chambers are ideal for routine drying and sterilization tasks up to 300°C. Binder™ Avantgarde.Line Model ED 56 Drying and Heating Chambers with Natural Convection ensures fast and uniform drying. ED056-230V, Standard, Series ED - Drying/heating chambers Avantgarde.Line with natural convection

Binder™ Classic.Line Model E 28 Drying and Heating Chambers with Mechanical Adjustment

Reliable and powerful unit in a solid configuration. Binder™ Classic.Line Model E 28 Drying and Heating Chambers with Mechanical Adjustment are ideal for tasks in basic research, as well as in human and veterinary medicine. E028-230V-T, with TB class 1, Series E - Drying/heating chambers with mechanical adjustment, 28 L

Eppendorf™ Thermoblock for MTPs and Deepwell Plates

Use these thermoblocks with the Eppendorf ThermoMixer™ comfort and ThermoStat plus for a wide range of heating, cooling and mixing applications. Eppendorf™ Thermoblocks for MTPs and Deepwell Plates fit almost any lab tube format and allow maintaining accurate, uniform temperatures. Thermoblock for MTPs and Deepwell plates, with lid

Thermo Scientific™ Digital Dry Baths/Block Heaters

Increase lab versatility with the Thermo Scientific™ digital dry baths/block heaters. Dry Bath standard 4 blocks 200-240V

Compact Digital Dry Bath/Block Heater

Maximize bench space with our compact, lightweight dry bath with multiple combinations of block sizes for versatility. Compact Dry Bath 2 block 200-240V

Thermo Scientific™ Midi CO2 Incubators

Safely and efficiently operate this compact unit, featuring a microprocessor-based control system for comprehensive control, monitoring and display of all systems. CO2 INCUBATOR 40L MIDI 40

Thermo Scientific™ Forma™ Steri-Cult CO2 Incubator Accessories

Increase efficiency, enable portability 0-5 V Analogausgangsoption, für Steri-CultInkubatoren, werkseitiger Einbau

Fisherbrand™ Blocks for Fisherbrand™ Isotemp™ Digital Dry Baths/Block Heaters

A variety of blocks for any application Fisherbrand 8 x 20mm dia block

Fisher Scientific™ Isotemp™ Low Temperature Incubators

Fisher Scientific Isotemp low temperature incubators are an ideal choice for incubation above or below ambient temperature. Incubator BOD MDL 146E, 230 V.

Eppendorf™ Thermomixer™ R Accessory, Thermoblock Dry Blocks

Ensure precise “fit” for common lab tubes Thermoblock Eppendorf 8 x 5mLfor Eppendorf Thermomixer R and ThermoStat plus

Thermo Scientific™ Accessories for Isotemp™ and Napco CO2 Incubators: Gas Line Filter

For use with Fisher Scientific Isotemp CO2 and Thermo Scientific Napco incubators as indicated Replacement gas connection inline filters (10 pk)

Fisherbrand™ Isotemp CO2 Incubator

Value for everyday cell culturing . The Fisherbrand CO2 incubator provides proven technologies for reliable, homogenous growth environment and dependable quality. Fisherbrand CO2 incubator, stainless steel 150L chamber, 90°C decontamination cycle, TC CO2 sensor

Binder™ Stainless Steel CO2 Incubator

C150 CO2 incubator with hot air sterilization door hinged right

LMS™ 80 Cooled Incubator

Use this incubator for general sample cooling applications. LMS™ 80 Cooled Incubators are reliable and accurate temperature controlled cabinets. Designed for optimum performance and reliability. Facilitates small workloads, whilst maintaining the full functionality of the larger models. COOLED INCUBATOR -10°/+50°C 80L 1A

Fisherbrand™ Heratherm™ Refrigerated Incubators

Experience advancement in incubation with precision in temperature, increased energy efficiency, and ease of usability. Heratherm IMP400 Refrigerated Incubator 5 to 70°C with Peltier technology, 381 litres, 100-240V

MMM Medcenter™ Incubator Friocell

INCUBATEUR FRIOCELL 55 L 0-99,9°C

Binder™ Avantgarde.Line Model FD 115 Drying and Heating Chambers with Forced Convection

Use when fast drying and sterilization is required. Binder™ Avantgarde.Line Model FD 115 Drying and Heating Chambers with Forced Convection comes with homogeneous temperature distribution, quick dynamics and powerful fan. FD115-230V, Standard, Series FD - Drying/heating chambers Avantgarde.Line with forced convection

Thermo Scientific™ Forma™ CO2 Incubator Accessories

Precisely control the CO2 and temperature with Thermo Scientific™ Forma™ Series CO2 Incubators.  Forma™ CO2 Incubator Accessories are important components for optimal operation. COPPER INTERIOR COMPONENTS KITS

Memmert™ Natural Convection Incubator with Single Display and Touchscreen

Includes applications requiring temperatures of up to +80°C, including critical incubations at +37 °C. Memmert™ Natural Convection Incubator with Single Display and Touchscreen ensures that key temperature overshoots are completely eliminated and that valuable loads are warmed up accurately. INCUBATOR IN450 SINGLEDISPLAY 449L 30-80°C

MMM Medcenter™ MMM Medcenter Incucell 22 Standard Incubator

INCUBATOR 22L 70°C240x295x355mm (bxtxh)

Thermo Scientific™ Digital Heating Cooling Drybath

Maximize lab space and flexiblity with our compact programmable heating/cooling bath with digital display. COOL/HEAT DRYBTH120V/US PLG

Eppendorf™ Thermoblock Adapter Plate

Adapter 96x0,2ml PCR tube in MTP blocktest tubes to insert in blocks for MTPs

  spinner