Elektrophorese

Invitrogen™ Novex™ NuPAGE™ 4-12% Bis-Tris Protein Gels, 1.0mm, 10 well

Pre-cast polyacrylamide gels designed to give optimal separation of small- to medium-sized proteins under denaturing conditions NuPAGE Novex 4-12% Bis-Tris Gel 1.0 mm, 10 well1 box/10 gels

Invitrogen™ Novex™ NuPAGE™ 4-12% Bis-Tris Protein Gels, 1.0mm, 12 well

Pre-cast polyacrylamide gels designed to give optimal separation of small- to medium-sized proteins under denaturing conditions NuPAGE Novex 4-12% Bis-Tris Gel 1.0 mm, 12 well1 box/10 gels

Thermo Scientific™ PageRuler™ vorgefärbte Proteinleiter (10-180 kDa)

Mixture of 10 blue-, orange- and green-stained proteins (10 to 180kDa) used as size standards in protein electrophoresis (SDS-PAGE) and Western blotting. X10 PageRuler(TM) Prestained ProteinLADDER

Invitrogen™ Novex™ SeeBlue™ Plus2 Pre-stained Protein Standard

Allows you to easily visualize protein molecular weight ranges during electrophoresis and quickly evaluate Western transfer efficiency SeeBlue Plus2 Pre-Stained Standard, 500 µl

Thermo Scientific™ PageRuler™ Plus vorgefärbte Proteinleiter (10-250 kDa)

Mixture of 9 blue-, orange- and green-stained proteins (10 to 250kDa) used as size standards in protein electrophoresis (SDS-PAGE) and Western blotting. X10 PageRuler(TM) Plus Prestained ProteiLAD

Invitrogen™ Novex™ SimplyBlue™SafeStain

Less hazardous and does not require methanol or acetic acid fixatives or destains SimplyBlue SafeStain, 3.5 L

Invitrogen™ Novex™ NuPAGE™ 4-12% Bis-Tris Protein Gels, 1.0mm, 15 well

Pre-cast polyacrylamide gels designed to give optimal separation of small- to medium-sized proteins under denaturing conditions NuPAGE Novex 4-12% Bis-Tris Gel 1.0 mm, 15 well1 box/10 gels

Hoefer™ LEAD SET 4 MALE/2MM FEMALE W/CABLE

Accessory for Electrophoresis Unit Replacement high voltage leads

Invitrogen™ Novex™ NuPAGE™ 12% Bis-Tris Protein Gels, 1.0mm, 12 well

Pre-cast polyacrylamide gels designed to give optimal separation of small- to medium-sized proteins under denaturing conditions X10 Bis-tris gel Invitrogen(tm) NuPAGE(r) Novex(r)

Invitrogen™ Novex™ Mark12™ Standard, ungefärbt

Zur bestmöglichen Schätzung des Molekulargewichts von Proteinproben über einen großen Molekulargewichtsbereich hinweg Mark12 Unstained Standard, 1 ml

Invitrogen™ Novex™ XCell SureLock™ Mini-Cell

Quickly and easily run up to two Novex 8 x 8cm minigels, leak-free without any clamps or grease XCell SureLock® Mini-Cell

Invitrogen™ Novex™ NuPAGE™ 12% Bis-Tris Protein Gels, 1.0mm, 10 well

Pre-cast polyacrylamide gels designed to give optimal separation of small- to medium-sized proteins under denaturing conditions X10 Bis-tris gel Invitrogen(tm) NuPAGE(r) Novex(r)

Invitrogen™ Novex™ NuPAGE™ 4-12% Bis-Tris Protein Gels, 1.5mm, 15 well

Pre-cast polyacrylamide gels designed to give optimal separation of small- to medium-sized proteins under denaturing conditions X10 Bis-tris gel Invitrogen(tm) NuPAGE(r) Novex(r)

Thermo Scientific™ PageRuler™ ungefärbte Proteinleiter

A mixture of seven native proteins (14.4 to 116kDa) for use as size standards in protein electrophoresis (SDS-PAGE). X2 PageRuler(TM) Unstained Protein (2 x 250 ul)LADDER

Thermo Scientific™ Pierce™ PageBlue™ Proteinfärbelösung

A sensitive formulation of colloidal coomassie G-250 dye for endpoint staining of proteins in polyacrylamide gels and on PVDF membranes without methanol or acetic acid. PAGEBLUE PROTEIN STAININGSOLUTION

Invitrogen™ Novex™ pH 3-10 IEF Protein Gels, 1.0mm, 10 well

Used for pI determination and are excellent for native applications using soluble proteins PH 3-10 IEF GEL 1.0MM 10W, 5 PER BOX

Invitrogen™ Novex™ NuPAGE™ 10% Bis-Tris Protein Gels, 1.0mm, 12 well

Pre-cast polyacrylamide gels designed to give optimal separation of small- to medium-sized proteins under denaturing conditions NuPAGE Novex 10% Bis-Tris Gel 1.0 mm, 12 well1 box/10 gels

Invitrogen™ Novex™ 20X Bolt™ MES SDS Running Buffer

Optimized for use with Bolt™ Bis-Tris Plus gels, and are available in a variety of formats 500 ML BOLT MES SDS RUNNING BUFFR 20X

Invitrogen™ Bolt™ 4 bis 12 % Bis-Tris Plus Gele, 15-Well

Die vorgegossenen Polyacrylamid-Gele sind für eine optimale Abscheidung von kleinen bis mittelgroßen Proteinen unter denaturierenden Bedingungen konzipiert X10 Bolt 4-12 percent Bis-Tris Plus Gels, 15-well

Invitrogen™ Novex™ SilverXpress™ Silver Staining Kit

Staining is complete in a little over one hour SilverXpress Silver Staining Kit, staining for 25mini gels

Invitrogen™ Novex™ Colloidal Blue Staining Kit

Five times more sensitivity than Coomassie™ R-250— and can detect as little as 10ng of BSA Colloidal Blue Staining Kit, 1 kit

Invitrogen™ Bolt™ 4 bis 12 % Bis-Tris Plus Gele, 10-Well

Die vorgegossenen Polyacrylamid-Gele sind für eine optimale Abscheidung von kleinen bis mittelgroßen Proteinen unter denaturierenden Bedingungen konzipiert X10 Bolt 4-12 percent Bis-Tris Plus Gels, 10-well

Thermo Scientific™ Pierce™ Silber Färbe-Kit

Stain proteins in 1D and 2D gels with this rapid, ultra-sensitive and versatile silver stain system that yields consistent and reliable results. Pierce Silver Stain Kit

Invitrogen™ Novex™ Sharp Pre-stained Protein Standard

Designed for accurate, easy, and convenient molecular weight estimation of a wide range of molecular weight proteins during SDS-PAGE and Western blotting Novex Sharp Pre-stained Protein Standard, 2 × 250µl

Invitrogen™ Novex™ HiMark™ Pre-stained Protein Standard

Designed for analysis of high molecular weight proteins on NuPAGE™ Novex™ Tris-Acetate gels HiMark Pre-stained Protein Standard, 250 µl

Invitrogen™ Novex™ iBlot™ 2 Nitrozellulose-Transferstapel

Für die Übertragung von Proteinen mit dem iBlot 2 Gel-Transfergerät 10 stacks, iBlot 2 Transfer Stacks,nitrocellulose, mini

Invitrogen™ Novex™ NativeMARK™ Unstained Protein Standard, Unstained

Ready-to-use protein standard designed for molecular weight estimation of proteins using native gel electrophoresis NATIVEMARK UNSTD PROTEIN STD

Invitrogen™ Novex™ BenchMark™ Protein Ladder, Unstained

Molecular weight standard for SDS-PAGE X2 Protein ladder BenchMark(tm) Store at -20C

Invitrogen™ Bolt™ 4 bis 12 % Bis-Tris Plus Gele, 12-Well

Die vorgegossenen Polyacrylamid-Gele sind für eine optimale Abscheidung von kleinen bis mittelgroßen Proteinen unter denaturierenden Bedingungen konzipiert X10 Bolt 4-12 percent Bis-Tris Plus Gels, 12-well

Invitrogen™ Novex™ 10X Bolt™ Sample Reducing Agent

Optimized for use with Bolt™ Bis-Tris Plus gels, and are available in a variety of formats 10 ML BOLT SAMPLE REDUCING AGENT

  spinner