Bottle Closures

Kimble™ Open-Top PolypropyleneScrew Thread Closures with Red PTFE-Faced Silicone Septa

Autoclavable and used for multiple injections X1000 CLOSURE PRE-SLIT BLUE 9-425

Kimble™ Kim-Kap™ Disposable Closures

Available in natural (clear) or choice of four colors X250 CAP KIM-KAP PP 25MM

Thermo Scientific™ 8mm Autosampler Vial Screw Thread Caps

Available in an variety of styles to match your application. Pre-assembled caps and septa minimize contamination. X100 Screw cap Thermo Scientific open top polyprop

Kimble™ Black Phenolic Screw Caps

Bond between liner and cap retains adhesive properties even after repeated autoclaving X150 CAPS FOR ESSAY TUBES 24-410

Fisherbrand™ Silicone Recessed Septum Stoppers

Nontoxic and autoclavable recessed septum stoppers are externally serrated to create an effective internal seal X10 Silicone stopper 15mm plug dia

Fisherbrand™ White Polypropylene Caps with PTFE Liners

Economical alternative to Thermoset and Phenolic PTFE lined caps. Fisherbrand™ White Polypropylene Caps have PTFE facing backed by F217 liners. X500 Plastic screw caps, PTFE faced PE lined, white, size 43/400, Fisherbrand

Thermo Scientific™ 8mm Autosampler Vial Septa

Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of applications. X100 SEPTUM CHROMACOL PTFE/SILICONE/PTFE 8MMred/white/red (pack of 100)

Cole Parmer™ Indenti-plug™ Plastic Foam Stopper

Keep the contents of your containers secure with these durable and reusable stoppers. Indenti-plug™ Plastic Foam Stoppers can also be used as a cleaner for pipettes, tubes, vials and precision tubing. X80 FOAM STOPPERS 46-50MM WHITE

Thermo Scientific™ 9mm Autosampler Vial Screw Thread Caps

Prevent septa push through and over- and under-tightening. With AVCS built into these 9mm screw caps you will get an optimal, consistent seal every time. X100 AVCS 9mm RED CAP&TS SEPTA

Cole Parmer™ PTFE O-Ring/Gasket/Seal

GASKET PTFE FOR SYRINGE FILTER HOLDER 13MM

Thermo Scientific™ Nalgene™ Carboy Replacement Screw Closures and Gaskets

Guarantee a leakproof system using Thermo Scientific™ Nalgene™ Replacement Screw Closures and Gaskets. Schraubverschluss, 120 mm PP für Dose VE=12 Stück

Cole Parmer™ PTFE O-ring

KS13 PTFE O-RING

Thermo Scientific™ Nalgene™ Narrow-Mouth and Wide-Mouth Bottle Replacement Closures

Fit these replacement closures onto Thermo Scientific™ Nalgene™ narrow-mouth and wide-mouth bottles. X12 24MM SCREW CLOSURE, PP

Fisherbrand™ Screw Caps for Disposable Glass Tubes

Phenolic caps have cemented-in rubber liners X1000 Lock for Test tubes, rubber gasket, 13-415

Thermo Scientific™ Nalgene™ Sealing Caps for Oak Ridge Centrifuge Tubes

Ensure leakproof† service of Thermo Scientific™ Nalgene™ centrifuge bottles at their recommended maximum rated speeds by using these sealing caps. X2 SEALING CAP BOTTLE 250MLDichtung VE=2 Stück

Fisherbrand™ Turnover Septum Stoppers

For narrow-aperture containers X10 Fisherbrand turnover stopper 17.5mm plug dia

Thermo Scientific™ 10mm Autosampler Vial Screw Thread Caps

10mm Wide Opening Screw Caps and Septa feature a 10-425 thread finish and are available in an assortment of styles to match your application needs. 10mm L/Blue Target ap/SeptumPre-Slit PTFE/Silicone

Thermo Scientific™ 11mm Autosampler Vial Crimp Caps

Minimize contamination from handling with pre-assembled caps and septa; compatible with most HPLC and GC autosamplers. X100 11mm red alum crimp seal, tef/sil,C4011-4R

Thermo Scientific™ Caps for Nunclon™ Delta Flasks

Protect your valuable cell culture samples. These caps for Thermo Scientific™ Nunclon™ Delta Flasks are offered in two styles—vent/close, filter—to meet application needs. X100 Filter Cap Nunc for 175cm2 TC flask CASE OF175/185/500cm², steril VE=100 Stück

Thermo Scientific™ 10mm Autosampler Vial Septa

Thermo Scientific™ National Target 10mm Septa are designed for use with 10-425 threaded caps. X1000 SEPTUM NATIONAL SCIENTIFIC TARGET PTFE 10MM(pack of 1K)

Thermo Scientific™ Nalgene™ Colored Polypropylene Closures with 24-415 Finish

Ensure leakproof performance with Nalgene Colored Polypropylene Closures—one-piece and linerless with integrally molded seal ring. X1000 CLOSURE RED PP

Thermo Scientific™ 11mm Autosampler Vial Snap Caps

11mm Wide Opening Snap-It Caps and Septa are easy to apply and easy to remove and fully compatible with all Snap-It vials. X100 Snap-it seal,t/s/t, , MA: C4011-53

Thermo Scientific™ 8mm Autosampler Vial Crimp Caps

8mm Crimp Top Closures provide a leak-resistant seal, feature 4mm openings and are available with a variety of septa materials with and without liners. X100 BLUE CAP W/SI/PTFE SEAL 8MM FINISH

Thermo Scientific™ Nalgene™ Colored Polypropylene Closures with 38-430 Finish

Ensure leakproof performance with Nalgene Colored Polypropylene Closures—one-piece and linerless with integrally molded seal ring. X250 CLOSURE PP WHITE 38MM

Thermo Scientific™ Nalgene™ Sealing Cap Assemblies

Process tubes at their highest rated speed level (10,000 x g or greater) without leakage, even when full with Thermo Scientific™ Nalgene™ Sealing Cap Assemblies. X2 SEALING CAP ASSEMBLY FOR CFT- 648-K (PACK OF 2)

Fisherbrand™ Colored Screw Caps

For use with nonsterile skirted- and conical-bottom tubes X500 SCREW CAP + O RING NATURAL

Fisherbrand™ Combination Seal Aluminum Vial Crimp Closure

X1000 11mm Aluminium Cap, clear , centre hole, PTFE red/Silicone white/PTFE red, 45° shore A, 1.0mm

Thermo Scientific™ Aluminum Crimp Seals with Prefitted Septa for 12 x 32mm Vials

You can count on a secure, leak-resistant seal with Thermo Scientific™ National Aluminum Crimp Seals. X100 11mm yellow alum crimp seal, tef/sil,C4011-4Y

Corning™ Black Phenolic Threaded Screw Caps with PTFE Liners

Made from fabricated specially formulated resin to resist the effects of temperature and steam in autoclaving. Corning™ Black Phenolic Threaded Screw Caps with PTFE Liners provide a highly inert sealing face. X12 SCREW CAPS WITH PTFE LINER 400/24

Thermo Scientific™ Nalgene™ Replacement Closures for Economy Wash Bottles

Through-the-top tubing with closure and stem molded in one piece Schraubverschluß 24 mm, mit Steigrohr fürSpritzflaschen, VE=25 Stück

  spinner